Description Morris Lubricants Ankor Wax Preservative Fluid A solvent deposited, general purpose medium to long term rust preventative with water displacing properties. On drying, a thin grease film provides long term indoor protection or medium to long term outdoor protection dependent upon storage conditions. Application, preferably by dipping but spraying or brushing may also be employed. Removal is by hydrocarbon solvent or by use of a suitable alkaline cleaner. Ankor Wax is a special solvent deposited, long term corrosion preventative, having low viscosity and surface tension thereby enabling it to spread rapidly, penetrating into all inaccessible areas and covering all surfaces however irregular. It dries to leave a continuous firm wax protective coating that imparts excellent corrosion protection properties. Ankor Wax has de-watering properties and therefore can be used where the metal parts to be treated are wet. All traces of water are displaced before the protective film is applied. Ankor Wax is effective in damp and humid climates and gives excellent protection against salt spray. Protection Performance: Indoors 3 – 5 years Covered Outdoors 2 years Outdoors 18 months Physical Characteristics: Appearance Brown thixotropic fluid Density @ 15ºC 0.840 Closed Flash Point (ºC) 46 Film Thickness (µm) 30 – 100 Drying time @ 20 ºC 30 – 90 mins (dependent on application thickness) Dewatering Yes Figures based on average production values Buy Now
